- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Friends,
I used to run the "Demo how to use TRDB-D5M with LTM on DE2-70", but i can't, i found one error before downloading the program in the EEProm of the FPGA DE2-70, in the debug phase, The error found is the following : "Using cable "USB-Blaster [USB-0]", device 1, instance 0x00 Pausing target processor: OK Reading System ID at address 0x01401070: ID value does not match: read 0x5C716C23; expected 0x59DA1B27 Timestamp value does not match: image on board is older than expected Read timestamp 8:43:18 2008/10/24; expected 14:38:41 2011/08/15 The software you are downloading may not run on the system which is currently configured into the device. Please download the correct SOF or recompile. Restarting target processor" I used the Quartus II 9.1 Web Edition You find also joined with this email the program that i trie to run, Please help me to run this program, I want to know the different step that i must do befor running this program, also i want to know what is the error done Think youLink Copied
1 Reply
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
As the error message suggests you should upload the .sof file that corresponds to the software you are trying to upload.
And each time you do a change to the SOPC builder project, you should recompile both the Quartus hardware project and the software, upload the .sof image, and then upload the software.
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page