Intel® Quartus® Prime Software
Intel® Quartus® Prime Design Software, Design Entry, Synthesis, Simulation, Verification, Timing Analysis, System Design (Platform Designer, formerly Qsys)
16559 Discussions

quartus_jli device verify failure on USB 3.0

Altera_Forum
Honored Contributor II
1,113 Views

Hi all, 

# # Description 

 

I'm having a verify failure when programming Cyclone IV with quartus_jli only when running on USB 3.0. 

 

When I use the same computer with its USB 2.0 I don't have this issue. 

 

Output: 

 

``` 

Info: Command: quartus_jli -c 1 -a program ./firmware/BrainsightNIRS.jam 

Inconsistency detected by ld.so: dl-close.c: 811: _dl_close: Assertion `map->l_init_called' failed! 

Device# 1 is EPCS64 

erasing ASC device(s) in sector mode... 

programming ASC device(s) in sector mode... 

CRC verify ASC device(s) in sector mode... 

Device verify failure 

Exit code = 11... Device verify failure 

Error: Quartus Prime Jam Tools was unsuccessful. 0 errors, 0 warnings 

Error: Peak virtual memory: 189 megabytes 

Error: Processing ended: Fri Apr 21 11:39:21 2017 

Error: Elapsed time: 00:01:35 

Error: Total CPU time (on all processors): 00:00:19 

 

 

``` 

# # Environment 

 

* Ubuntu 16.04 

* Quartus Altera Lite 16.0 

* USB 3.0 (Computer) Connected to FX2 USB chip connected to FPGA Cylone IV 

 

Had anyone had a similar problem?
0 Kudos
0 Replies
Reply