- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi All..
This is for beginner (like me), who are all interested to program serial(or) config devices via JATG. I was searching for last couple of days.. difficult to found it, finally I was found that the step by step process.. I would like to share all the members to searching such a option. (I was found this procedure in the web link:http://quartushelp.altera.com/14.1/mergedprojects/program/pgm/pgm_pro_plf_file.htm)the procedure is: To program erasable programmable configurable serial (EPCS) devices with the Serial Flash Loader:
- Use the Assembler to generate an SRAM Object File (.sof) containing the FPGA configuration data.
- On the File menu, click convert programming files. (http://quartushelp.altera.com/14.1/mergedprojects/program/pgm/pgm_com_convert.htm)
- Under output programming file, select jtag indirect configuration file (.jic) in the list.
- In the configuration device list, select the target configuration device you want to program.
- In the file name box, type the file name for the JTAG Indirect Configuration File you want to create.
- To specify an existing SRAM Object File for conversion to a JTAG Indirect Configuration File, select the sof data item under input files to convert and click add file.
- To specify the target FPGA device that will program the configuration device, select the flash loader item under input files to convert and click add device. (http://quartushelp.altera.com/14.1/mergedprojects/program/pgm/pgm_image.htm)
- To generate the JTAG Indirect Configuration File containing configuration device programming data, click ok.
- On the Tools menu, click programmer. (http://quartushelp.altera.com/14.1/mergedprojects/program/pgm/pgm_image.htm)
- If necessary, in the mode list, select jtag.
- To add the newly created JTAG Indirect Configuration File to the programming list, click add file in the Programmer window and select the JTAG Indirect Configuration File.
- In the same row as the FPGA device in the programming list, turn on the program/configure option.
- In the same row as the configuration device in the programming list, turn on the program/configure option.
- To configure the FPGA device with the Serial Flash Loader IP and then program the configuration device, click start in the Programmer.
- To reconfigure the FPGA device with configuration data from the configuration device, turn the power to the FPGA device off and on. Enjoy.. thanks and regards..
Link Copied
0 Replies
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page