Ethernet Products
Determine ramifications of Intel® Ethernet products and technologies
4810 Discussions

EXPI9301CTBLK Network Adapter won't connect to network

idata
Employee
1,325 Views

I recently bought this NIC and installed it in my WinXP Pro desktop system.

I downloaded the PRO drivers from Intel and the OS sees the NIC with no problem.

However, I am continuously getting the following sequence of messages:

network disconnect

acquiring IP address

network disconnect

acquiring IP address

network disconnect

This does not stop.

I tried a different cable. I tried a different switch to connect to.

Any ideas on what might cause this?

Thanks!

Mike

0 Kudos
1 Reply
Mark_H_Intel
Employee
466 Views

Hi Mike,

Did you ever figure out a solution? What did you do?

If you are still looking for ideas, then here are a few things you can try:

  1. Completely uninstall the Intel Network Connections software. Then install the latest software from http://downloadcenter.intel.com/detail_desc.aspx?agr=Y&DwnldID=18717 http://downloadcenter.intel.com/detail_desc.aspx?agr=Y&DwnldID=18717.

     

  2. If you have another PCI Express slot, move the adapter to a different slot, especially if you are using one of the x16 slots usually used for video adapters.

     

  3. Make sure your computer BIOS is up to date. Sometimes PCIe slot issues get fixed by BIOS updates.

     

  4. Run the hardware diagnostics from the adapter properties in Windows Device Manager. If the diagnostics pass, the adapter is probably good. See the picture for how to find the hardware diagnostics.

     

I hope this helps.

Mark H

0 Kudos
Reply