Items with no label
3335 Discussions

Intel RealSense Robotic Kit - Up board booting directly to EFI

AndreCarlucci
Beginner
1,472 Views

I just received a brand new Intel RealSense Robotic Development Kit.

I took the up board out of the box, made sure the battery and the cooler were ok, connected the HDMI cable, keyboard, mouse and then the power adapter.

The Up logo was shown on the monitor and then it went directly to the EFI Shell. I tried everything I could: reset the bios settings, unplugged the battery, reset again, nothing.

Under BIOS -> Boot -> Boot Options Priorities is empty.

Under BIOS -> Chipset -> South Bridge: eMMC Unknown M52532 29626D14 (29.1 GB).

I changed the setting on BIOS -> Boot -> OS Image ID from Windows 8.1 to Android and tried both. Same behavior.

I tried to boot using a bootable USB with Windows 10 and it won't detect it. Same thing with Ubuntu bootable installation.

Am I missing something? Is this board broken?

See the output I'm getting attached.

Thanks in advance

0 Kudos
1 Solution
idata
Employee
466 Views

Hi Andrecarlucci,

 

 

Thanks for reaching out.

 

 

Well, that's a weird issue. Are you following the Quickstart guide? If you are not, please make sure to follow it: https://01.org/developerjourney/recipe/intel-realsense-robotic-development-kit# steps.

 

 

Now, I think you have a problem with your UP Board that is not related to your Intel® RealSense™ Camera R200, I recommend you to contact the Up Board Community ( https://up-community.org/) to assist you in a better way.

 

 

Have a nice day.

 

 

Regards,

 

Leonardo R.

View solution in original post

0 Kudos
3 Replies
idata
Employee
467 Views

Hi Andrecarlucci,

 

 

Thanks for reaching out.

 

 

Well, that's a weird issue. Are you following the Quickstart guide? If you are not, please make sure to follow it: https://01.org/developerjourney/recipe/intel-realsense-robotic-development-kit# steps.

 

 

Now, I think you have a problem with your UP Board that is not related to your Intel® RealSense™ Camera R200, I recommend you to contact the Up Board Community ( https://up-community.org/) to assist you in a better way.

 

 

Have a nice day.

 

 

Regards,

 

Leonardo R.
0 Kudos
idata
Employee
466 Views

Hi Janunezc,

 

 

Thank you so much for letting us know.

 

 

I'm going to report this to the right team to fix it.

 

 

Regards,

 

Leonardo R
0 Kudos
Reply