ohs900 and 2.6.11

[Altera_Forum]

Any one ported ohs900 USB 1.1 to uClinux 2.6.11? 

 Aparently some structures changed and the 2.6.10 driver won't compile.

[Altera_Forum]

Anyone has news about this ? 

 Thanks  Pierre-Olivier

[Altera_Forum]

I don't have the driver code for 2.6.10, can you attach it to, 

http://forum.niosforum.com/forum/index.php?showtopic=3174 (http://forum.niosforum.com/forum/index.php?showtopic=3174) May be I can check them.  including, arch/nios2nommu/kernel/usb.c drivers/usb/host/ your ohs900?

[Altera_Forum]

This would be an excellent driver to port IMO; I have a few custom boards with USB 1.1 PHYs, but no driver to use them! I could test these out if a driver was available.

[Altera_Forum]

Hello, 

 the project comes from opencores :   http://www.opencores.org/pdownloads.cgi/list/usbhostslave (http://www.opencores.org/pdownloads.cgi/list/usbhostslave)  it contains the SOPC builder component, the uClinux driver (for 2.6.10 kernel) and some other stuff (NiosIDE project...)  I find it very useful too, but I am not familiar enough with Linux USB drivers so I can't port it myself....  Regards  Pierre-Olivier

[Altera_Forum]

Hello, 

 the project comes from opencores :   http://www.opencores.org/pdownloads.cgi/list/usbhostslave (http://www.opencores.org/pdownloads.cgi/list/usbhostslave)  it contains the SOPC builder component, the uClinux driver (for 2.6.10 kernel) and some other stuff (NiosIDE project...)  I find it very useful too, but I am not familiar enough with Linux USB drivers so I can't port it myself....  Regards  Pierre-Olivier

[Altera_Forum]

I have checked the ohs900 driver. It needs to be reworked for newer kernels. 

Better ask the author.

[Altera_Forum]

Hi hippo, 

 thanks for taking time to check it out.  Regards,  Pierre-olivier